Tutorial: Forward Windows Events via SETP#

Use this tutorial when EventReporter should forward selected Windows events to another Adiscon product over SETP.

Goal#

At the end of this procedure, EventReporter will forward matching Windows event log entries via SETP.

Prerequisites#

  • A reachable SETP receiver

  • The target host name or IP address

  • Port and TLS settings agreed between sender and receiver

Steps#

  1. Create or choose the ruleset whose events should be forwarded.

  2. Add a Forward via SETP action.

  3. Configure the receiver connection.

    • Enter the destination host name or IP address.

    • Set the destination port.

    • Enable TLS only if the receiver is configured for it.

  4. Save and apply the configuration.

  5. Restart the EventReporter service if required.

Verification#

  1. Trigger a matching event.

  2. Confirm that the SETP receiver gets the forwarded event.

  3. If delivery fails, verify host, port, and TLS settings on both sides.

Next step#

If the basic path works, continue with: